Need help?Do you have a question about the Bomag BPR 35/60 and is the answer not in the manual?
General safety precautions, intended/unintended use, inherent risks, and regular inspection recommendations.
Guidelines on operator qualifications, unauthorized modifications, damage, instruction notes, and safe loading/transport.
Safety measures for starting the engine, parking, refueling, and performing maintenance work.
Safety precautions for working on the engine/fuel system, cleaning, welding, and managing safety stickers.
Introduction to the controls section, emphasizing the need to read for detailed information before operation.
Detailed explanation of the function and location of various indicators and control elements on the machine.
Essential inspections to perform before each working day or longer operating period for safety and functionality.
Instructions for folding the steering rod, starting the engine, and basic operation including forward and backward drive.
Procedures for safely shutting down the engine, assembling transport wheels, and loading/transporting the machine.
Emphasizes safety, proper procedures, and the benefits of thorough maintenance for machine longevity.
Details the types of fuels, oils, and lubricants required for the machine, including quality and viscosity.
Provides a schedule of maintenance tasks with their recommended intervals, referencing the maintenance table.
Covers essential daily tasks like cleaning the machine and checking engine oil and fuel levels.
Guide for inspecting, cleaning, and replacing the air filter element to ensure engine performance.
Detailed procedure for draining and refilling the engine oil, including safety precautions.
Measures to protect the engine from corrosion during long-term storage or winterization.
Provides general advice and safety regulations to observe when troubleshooting machine faults.
Lists common engine faults, their possible causes, and recommended solutions for effective troubleshooting.
Outlines procedures for safely decommissioning the machine and preparing it for disposal in compliance with regulations.
General| Engine type | 4-stroke gasoline engine |
|---|---|
| Engine manufacturer | Honda |
| Fuel type | Gasoline |
| Travel speed | 20 m/min |
| Impact force | 30 kN |
| Compaction depth | 0.4 m |
| Plate width | 600 mm |
| Frequency | 650 vpm |
| Centrifugal force | 30 kN |
| Base plate width | 350 mm |
| Base plate length | 600 mm |
To Next Page
