Maintenance
BOMAG38 BPR 35/60
6.5 Maintenance table
With all maintenance intervals perform also
the work for shorter preceding service inter-
vals.
No. Maintenance work Comment
daily
weekly
monthly
half-annually
annually
as required
6.6
Clean the machine X
6.7
Check the engine oil level Dipstick mark X
6.8
Check the fuel level X
6.9
Check, clean the air filter, replace if nec-
essary
in case of extreme dust
check every day
replace at least 1 x year
X
6.10
Clean the cooling fins and the cooling
air intake openings
X
6.11
Change the engine oil at least every 100 operating
hours
X
6.12
Check, clean the spark plug, replace if
necessary
X
6.13
Clean the slurry filter X
6.14
Check the oil level in the exciter housing X
6.15
Check the V-belt tension, if necessary
replace the V-belt
X
6.16
Check, adjust the valve clearance at least every 300 operating
hours
Intake valve: 0.15 mm
(0.006 in)
Exhaust: 0.20 mm (0.008 in)
X
6.17
Clean the fuel screen X
6.18
Replace the starter rope X
6.19
Change the oil in the exciter shaft hous-
ing
at least every 500 operating
hours
X
6.20
Check the hydraulic oil level X
6.21
Check the rubber buffers X
6.22
Tighten all bolted connections X
Go to Discount-Equipment.com to order your parts
To Next Page
Loading...
