Need help?Do you have a question about the Bomag BPR 30/38-3 and is the answer not in the manual?
General rules and responsibilities for machine operation and maintenance.
Defines the specific applications and purposes for which the machine is designed.
Highlights dangers arising from improper or unauthorized use of the machine.
Specifies age, training, and condition requirements for machine operators.
Warns against unauthorized modifications and their safety implications.
Explains how to interpret safety symbols and warnings within the manual.
Instructions for safely securing the machine during transport and lifting.
Pre-operation checks and steps for safely starting the engine.
Guidelines for safely parking the machine on level ground.
Safety precautions and procedures for refueling the machine.
Rules for performing maintenance, emphasizing qualified personnel.
Safety measures when performing maintenance or repairs on the engine.
Precautions for safe handling of the fuel system and fuel.
Safety guidelines for cleaning the machine, especially with water or steam.
Emphasizes that repairs must be done by qualified professionals.
Advises familiarizing with indicators and control elements before operation.
Lists essential checks to perform before each workday or long period of use.
Detailed instructions and safety warnings for refueling the machine.
Procedure for checking and topping up the engine oil level.
Steps to safely fold the steering rod into the operating position.
Step-by-step guide for starting the machine's engine.
Specific procedures for starting the engine in cold weather.
Addresses common issues and remedies for engine starting problems.
Instructions for operating the machine, including steering rod adjustment.
Correct procedure for stopping the engine safely to prevent damage.
Safety instructions and steps for loading the machine onto a transport vehicle.
General safety and preparation guidelines before performing maintenance.
Information on recommended engine oils and their viscosity based on temperature.
A table detailing recommended fuels, lubricants, and quantities for the machine.
Maintenance tasks to be performed on new or overhauled engines during the break-in period.
A comprehensive table outlining maintenance tasks and their frequency.
Instructions for cleaning the machine's body and engine components.
Steps for cleaning and inspecting the air filter elements.
Procedure for checking and topping up the engine oil level.
Steps for checking the fuel level and refueling safely.
How to check the oil level within the vibrator unit.
Instructions for cleaning engine cooling components to maintain performance.
Detailed procedure for draining and refilling the engine oil.
Steps for inspecting, cleaning, and gapping the spark plug.
Procedure for cleaning the fuel filter to ensure proper fuel flow.
Guide to checking, adjusting tension, and replacing the V-belt.
Instructions for cleaning or replacing the air filter element.
Procedure for checking and adjusting engine valve clearance.
Steps to clean the fuel screen to prevent blockages.
Procedure for changing the oil in the vibrator shaft housing.
How to check and top up the hydraulic oil level.
Instructions for checking the condition and fit of rubber buffers.
Guide for checking and retightening fasteners and inspecting for damage.
Table of specified tightening torques for various screw sizes.
General advice on troubleshooting, emphasizing qualified personnel and manual review.
A table listing common engine faults, their possible causes, and remedies.
General| Brand | Bomag |
|---|---|
| Model | BPR 30/38-3 |
| Category | Power Tool |
| Language | English |
To Next Page
