To Next PageTo Next Page
Need help?Do you have a question about the Bomag BPR 50 and is the answer not in the manual?
General| Brand | Bomag |
|---|---|
| Model | BPR 50 |
| Category | Power Tool |
| Language | English |
Technical specifications and dimensions for the BPR 50/55 D model.
Details noise and vibration levels for the BPR 50/55 D model.
Technical specifications and dimensions for the BPR 60/65 D model.
Details noise and vibration levels for the BPR 60/65 D model.
General safety principles, regulatory compliance, intended/unintended use.
Operator authorization, machine risks, changes, damage, inspections, and operating procedures.
Guidance on safe operation, transport, starting, parking, refueling, and maintenance.
Safety for maintenance, engine, electrical, battery, fuel system, cleaning, repair, and welding.
Importance of maintaining and adhering to machine safety labels.
Introduction to machine controls and indicators.
Detailed explanation of machine controls, levers, and switches.
Explains the operation and display of the soil compaction monitoring system.
General operational guidelines and reference to control elements.
Pre-operation checks to ensure machine safety and readiness.
Procedure for adjusting and securing the steering rod.
Step-by-step guide for starting the engine using the electric starter.
Instructions for starting the engine using the manual recoil starter.
Detailed operation and interpretation of the Economizer system.
Guidance on machine operation, driving forward/backward, and vibration.
Procedure for safely stopping the machine's engine.
Instructions for safely loading and transporting the machine.
General precautions and preparation for maintenance tasks.
Specifications and types of fuels and lubricants for the machine.
Summary table of recommended fuels and lubricants with quantities.
Specific maintenance tasks during the initial operating period.
Overview of maintenance tasks grouped by frequency (daily, monthly, etc.).
Routine checks and cleaning performed daily.
Maintenance tasks to be performed monthly.
Maintenance tasks to be performed every six months.
Maintenance tasks to be performed annually.
Maintenance tasks performed as needed.
General advice and safety precautions for troubleshooting.
Procedure for starting the machine using jump wires from another battery.
Information on fuses and their protective covers.
Table of common engine faults, causes, and remedies.
Troubleshooting specific issues with the Economizer system.
Procedures for permanently decommissioning and disposing of the machine.
