5.8 Shutting down the engine
NOTICE!
Do not shut the engine down all of the sudden from full
speed, but let it idle for a while for temperature equali-
zation.
Shift the throttle lever to position "MIN" Ä
Fig. 32 and let the
engine run with idle speed for a short while.
Vibration is shut down.
Set the throttle lever
Ä Fig. 33 to position "STOP".
The warning buzzer sounds.
Turn the ignition key Ä Fig. 34 to position "0" and pull it out.
The warning buzzer no longer sounds.
Fig. 32
Fig. 33
Fig. 34
Operation – Shutting down the engine
BPR 50/55 D / BPR 60/65 D
44
Go to Discount-Equipment.com to order your parts
To Next Page
Loading...
