Fill in hydraulic oil to approx. 40 mm (1.6 in) below the edge
of the filler opening Ä Fig. 78.
Screw in and tighten the plug Ä Fig. 79.
6.9.6 Check the rubber buffers
Check all rubber buffers Ä Fig. 80 for tight fit, cracks and
damage and replace immediately if damaged.
Fig. 78
Fig. 79
Fig. 80
Maintenance – Annual maintenance
BPR 50/55 D / BPR 60/65 D
76
Go to Discount-Equipment.com to order your parts
To Next Page
Loading...
