7.5 Trouble shooting Economizer
Fault Description Possible cause
Status-LED off Operation
Status-LED on no frequency detected Engine not running
Plug-in connector defective
Sensor/cable defective
Status-LED flashing Frequency detected, but outside
permissible range
Engine speed too low
Vibration frequency too low
Sensor defective
atypical soil
V-belt slipping
incorrect V-belt installed
Trouble shooting – Trouble shooting Economizer
BPR 50/55 D / BPR 60/65 D
85
Go to Discount-Equipment.com to order your parts
To Next Page
Loading...
