2.2.1 Noise and vibration data
The following noise and vibration data were determined in accord-
ance with the following guidelines under equipment specific condi-
tions and by using harmonized standards:
n EC Machine Directive edition 2006/42/EC
n Noise Emission Directive 2000/14/EC, Noise Protection Direc-
tive 2003/10/EC
n Vibration Protection Directive 2002/44/EC
During operation these values may vary because of the prevailing
operating conditions.
2.2.1.1
Noise data
L
pA
= 95 dB(A), determined acc. to ISO 11204 and EN 500.
WARNING!
Loos of hearing caused by too high noise burdens!
– Wear your personal protective outfit (ear
defenders).
L
WA
= 108 dB(A), determined acc. to ISO 3744 and EN 500.
2.2.1.2 Vibration data
Vector total of the weighted effective acceleration in three orthog-
onal directions:
Weighted total vibration value
a
hv
= 8.7 m/s
2
on crushed rock determined acc. to ISO 5349 and
EN 500.
Observe the daily vibration load (Industrial safety acc. to 2002/44/
EEC).
Sound pressure level at the opera-
tor's place
Guaranteed sound power level
Hand-arm vibration
Technical data – Technical data BPR 60/65 D
BPR 50/55 D / BPR 60/65 D
15
Go to Discount-Equipment.com to order your parts
To Next Page
Loading...
