Operation
BOMAG28 BPR 35/60
5.5 Work/operation
Danger!
Danger of accident!
Operate the machine only with the steering rod
folded down.
Guide the machine only by the steering rod.
Guide the machine so hat your hands do not
hit against solid objects.
Always keep an eye on a running machine.
Caution
!
Operate the vibratory plate only with full en-
gine speed, as otherwise the centrifugal clutch
will be destroyed.
For short breaks you should always return the
throttle lever to idle speed position, this avoids
premature wear of the centrifugal clutch.
Fig. 23
l Set the throttle lever (Fig. 23) to position
"MAX".
Drive forward
Fig. 24
l Push the travel lever (Fig. 24) forward, until the
vibratory plate has reached the desired speed.
The machines drives with a speed which corre-
sponds with the travel lever position.
Note
i
If the machine moves forward with considerably
reduced speed, pull the travel lever completely
back and shift it forward again.
Drive backwards
Danger!
Danger of accident!
As a measure to avoid injury the machine must
only be guided from the side by the steering
handle
Go to Discount-Equipment.com to order your parts
To Next Page
Loading...
