Bomag BW 211 PD-40 - User Manual

Service - Manual
Catalogue number.
008 911 63
03/2008
BW 211 / 212 / 213 D-40
BW 211 / 212 / 213 PD-40
S/N 101 582 42 . . . . S/N 101 582 43 . . . . S/N 101 582 44 . . . .
S/N 861 583 00 . . . . S/N 101 583 02 . . . . S/N 101 583 03 . . . . S/N 101 582 55 . . . .
S/N 101 582 47 . . . . S/N 101 582 48 . . . . S/N 101 582 49 . . . .
Single drum roller

Summary

General Information

Introduction to the Service Manual

This manual is intended to support expert mechanics in efficient repair and maintenance work.

Critical Safety Regulations

Safety regulations for repair work, including general safety, welding, and accident prevention.

General Repair Procedures

General Preparation and Guidelines

Covers general preparation steps like marking parts and lubrication before assembly.

Electrical System Service and Troubleshooting

Focuses on electronics importance, systematic diagnostics, and troubleshooting for electrical issues.

Welding and Electrical Safety Precautions

Details on preventing surge voltages and essential safety measures during welding operations.

Battery Handling and Safety Protocols

Outlines rules for safe battery handling, pole connection, and preventing short circuits.

Hydraulic System Maintenance and Flushing

Detailed instructions for servicing hydraulic components, emphasizing cleanliness and contamination prevention.

Air Conditioning System Service and Safety

Covers CFC/halon regulations, refrigerant handling, and essential maintenance for AC systems.

Fuel Hose Inspection and Integrity Check

Guidance on inspecting fuel hoses, checking for damage, and the significance of internal hose layers.

Gasket, Seal, and Radial Seal Installation

Best practices for installing gaskets, seals, and radial seals to ensure proper function and prevent damage.

Feather Key, Keyway, and Bearing Component Maintenance

Procedures for maintaining feather keys, keyways, ball bearings, and roller bearings, including inspection and reinstallation.

Bomag BW 211 PD-40 Specifications

General

Drum Width	2, 130 mm
Engine Type	Deutz TCD 4.1 L4
Drum Diameter	1, 500 mm
Travel Speed	0-12 km/h
Vibration Frequency	30 Hz