BOMANN VS 7329 - Appliance Equipment; Installation

22
Unpacking the appliance
• Remove the appliance from its packaging.
• Remove all packaging material, such as foils, filler
and cardboard packaging.
Dispose of packaging materials that are no longer
required in accordance with the locally applicable
regulations.
• To prevent hazards, check the appliance for any
transport damage.
• In case of damage, do not put the appliance into
operation. Contact your distributor.
NOTE:
Production residue or dust may have collected on the
appliance. We recommend cleaning the appliance
according to chapter “Cleaning and maintenance” .
Appliance equipment
Appliance overview
1
Interior light
2
Glass shelves
3
Fresh food drawer
4
Fruit/vegetable drawer
5
Door storage racks
Delivery scope
5x glass shelf, 1x fresh food drawer, 2x fruit/vege-
table drawer (with glass cover), 4x door rack, 1x egg
tray, 1x door handle incl. fixing material, 1x hinge
cover and 1x door stopper for reversing the door
opening
Installation
Conditions for the installation location
• Good ventilation is required around the appliance
to dissipate the heat properly and to guarantee ef-
ficient cooling operation at low power consump-
tion. Enough clearance is necessary.
- Gap to the back approx. 50～70 mm, to the
side walls and above the device each approx.
min. 100 mm;
- Place the appliance so that the appliance door
can open without being impeded.
• Only install at a location with an ambient tempera-
ture suitable for the climate class of the appliance.
The climate class can be found under
"Technical
data"
and on the rating label located in the interior
or on the appliance rear.
• Place the appliance on a steady and safe surface.
If the appliance is not horizontally leveled, adjust
the feet accordingly.