7
Check with a spirit level if the appliance is leveled
horizontally. If the appliance is not in balance, the
feet must be adjusted again.
Tighten the lock nuts with the wrench. The feet
must have solid ground contact.
Electrical connection
WARNING:
The installation to the mains supply must conform
to the local standards and regulations.
Improper connection may cause to an
electric
shock
!
It is not allowed to modify the plug provided with
the appliance! If the plug does not fit properly to
the outlet, let install a proper outlet by an author-
ized specialist.
The accessibility of the power plug must always
be ensured in order to disconnect the device from
the power supply in case of an emergency.
Make sure that the voltage supply matches the
specifications on the rating label (appliance back)
before connecting.
Connect the mains cable to a properly installed
and earthed wall outlet.
If the plug after installation is not accessible, a
corresponding disconnect device must be availa-
ble to meet the relevant safety regulations.
Startup / Operation
Prior using for the first time
Remove any accessories and other materials
from the appliance drum.
Clean the appliance drum. Follow the instructions
which we provide in the chapter “Cleaning and
Maintenance”.
Allow the appliance to dry the first time for about
30 minutes with old, damp clothes (see “Starting
the program”).
Drying advice
CAUTION: Do NOT dry in the appliance!
Fabrics which are not tumble-dryer safe. Always follow the instructions
on the care labels of your fabrics.
Washing that has not been washed.
Washing stained with cooking oil, acetone, alcohol, fuel, petrol, kero-
sene, stain remover, turpentine, wax, or wax remover. This must be
washed first in the washing machine with hot water and detergent be-
fore drying.
To Next Page
Loading...
