To Next Page
F
Frank FordAug 10, 2025
Why temperature sensor of BOMANN WT 5019 Dryer is not working?
- RrbirdAug 10, 2025
The temperature sensor in your BOMANN Dryer may not be working because of a shorted temperature sensor or a PCB fault.
Why temperature sensor of BOMANN WT 5019 Dryer is not working?
The temperature sensor in your BOMANN Dryer may not be working because of a shorted temperature sensor or a PCB fault.
What to do if my BOMANN WT 5019 Dryer shows error code E1 overheating?
If your BOMANN Dryer displays error code E1, which indicates overheating, switch the device off. Wait approximately 10 minutes before restarting the appliance, ensuring you've addressed the underlying issue. The most frequent cause of overheating is a blocked lint filter. Press the reset switch to switch the heat back on.
Why is my BOMANN WT 5019 Dryer housing hot and smells like burning?
If the housing of your BOMANN Dryer is hot or there is a smell of burning, it could be due to a blocked lint filter, which requires cleaning. Also, check if the extractor hose or vent is blocked.
What to do if my BOMANN WT 5019 does not function or start?
If your BOMANN Dryer does not function or start, check the power supply. Ensure the appliance is switched on and a program is selected. Verify that you have pressed the START/PAUSE button. Also, check that you have not exceeded the maximum capacity guidelines.
Why my BOMANN Dryer has unusual odors and powerful vibrations?
If your BOMANN Dryer exhibits unusual odors and powerful vibrations, ensure the appliance stands on a solid base. Also, check if the screw-in feet are aligned properly.
Warns about hot surfaces during operation and the danger of burns.
Covers load capacity, ventilation, flue connection, door placement, industrial chemicals, and filter use.
Details appliance usage by children, supervision, prohibition of playing, and maintenance by children.
Advises against self-repair and specifies replacement of damaged cords by qualified personnel.
Emphasizes compliance with local standards, avoiding extension cords, proper plug use, and accessibility for disconnection.
Lists fabrics and items that should not be tumble dried or require special pre-treatment.
Explains the purpose and operation of each button on the control panel: Power, Program, Drying Level, Child-safety lock, Start/Pause, Anti-crease.
Safety warnings for cleaning, including disconnecting power, cooling down, avoiding steam cleaners, and using appropriate cleaning agents.
Instructions on how to remove, clean, and replace the lint filter, emphasizing its importance for drying results.
General| Appliance placement | Freestanding |
|---|---|
| Drying capacity | 5 kg |
| Width | 600 mm |
| Height | 85 cm |
| Dimensions (H x W x D) | 850 x 600 x 580 mm |
