To Next PageTo Next Page
Need help?Do you have a question about the BONAIRE Durango WEAC628 and is the answer not in the manual?
General| Brand | BONAIRE |
|---|---|
| Model | Durango WEAC628 |
| Category | Air Conditioner |
| Language | English |
Critical safety advice and warnings for operating the evaporative cooler.
Essential requirements for safe and proper installation, including electrical connections.
Introduction to the cooler and a visual guide to its internal parts.
How to operate the unit in COOL/FAN modes and ventilation requirements.
Explanation of the bleed-off system's role in maintaining cooler efficiency.
Key checks to perform before starting the cooler for the first time.
Detailed steps for using COOL and FAN modes and fan speed selection.
List of necessary tools and materials for installation.
Instructions for unpacking and securing the fan assembly during installation.
Securing the unit internally and fitting the window infill panel.
Mounting the unit externally and ensuring required clearances for maintenance.
Methods for fixing the unit to walls and connecting the water supply.
Steps to verify correct operation and setup after installation.
Safety precautions and steps for removing the rear filter panel.
Guidance on correctly re-attaching the pump hose after filter access.
Cleaning and checking filter pads, water tank, and distribution system.
Inspecting and adjusting the float valve and checking the motor and fan.
Verifying bleed-off flow and pump operation, addressing potential issues.
Note on electrical maintenance requiring qualified service personnel.
A detailed schedule for performing maintenance tasks over five years.
Diagram and list of all parts with their corresponding part numbers.
Troubleshooting steps for when the unit fails to start.
Diagnosing and resolving problems with filter pads not getting wet.
Troubleshooting water leaks from overflow and droplets in the air stream.
Addressing issues of high humidity and insufficient cooling.
Resolving unpleasant odors and rapid mineral deposit buildup.
Instructions for installing and removing the optional winter cover for draught sealing.
Steps for warranty service, including proof of purchase and general terms.
Conditions on product operation, modifications, and the requirement for authorized service.
Warranty terms for self-installed or remotely located units outside the service network.
Lists items and situations that are explicitly excluded from or can void the warranty.
Table detailing warranty coverage lengths for parts and labor for different applications.
Specific warranty terms for products that have been aged in storage or used for demonstration.
Guidance on recording essential dealer and product information for warranty validation.
Warranty coverage for parts that are replaced during a service claim.
Contact details for regional authorized service providers.
