EasyManua.ls Logo

Bond HYPH4601-12 - User Manual

Bond HYPH4601-12
14 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
DANGER
WARNING
WARNING
If you smell gas:
1. Shut off gas to the appliance.
3. If odor continues, keep away from
the appliance and immediately call
Do not store or use gasoline or other
vicinity of this or any other appliance.
An LP-cylinder not connected for use
shall not be stored in the vicinity of
this or any other appliance.
Improper installation, adjustment, alteration, service or maintenance can cause injury or
property damage. Read the owner’s manual thoroughly before installing or servicing this
result causing property damage, personal injury or loss of life.
Save these instructions for future use. If
you are assembling this unit for someone
else, give this manual to him or her and
read and save for the future.
For outdoor use only.
Owner’s Manual
Steel Induction Patio Heater
Item No.:50237
Model No.HYPH4601-12

Table of Contents

Questions and Answers

  • C
    Caitlin RodriguezAug 5, 2025
    Why won't the pilot light stay on for my Bond Patio Heater?
    • R
      Robert GarrettAug 5, 2025
      If the pilot light on your Bond Patio Heater won't stay on, several factors could be at play. A bad thermocouple requires a replacement. Gas leaks necessitate checking connections and potentially replacing damaged parts. Low gas pressure, possibly due to an almost empty tank, could also be the culprit. Additionally, a blocked orifice needs cleaning, or the control knob might not be turned on, so ensure it is.
  • A
    aaron75Aug 14, 2025
    Why won't the pilot light light on my Bond Patio Heater?
    • V
      velezjohnAug 14, 2025
      If the pilot light on your Bond Patio Heater won't light, there could be several reasons. The orifice might be blocked, so try cleaning it out. There might be air within the supply system, in which case you should pump out the air from all lines. A loose connection could also be the problem, so check all fittings and tighten connections as necessary. Finally, debris around the pilot can prevent it from lighting, so clean it out.
  • B
    Brian BurnsAug 25, 2025
    What to do if the burner won't light on my Bond HYPH4601-12 Patio Heater?
    • Q
      qrogersAug 25, 2025
      If the burner on your Bond Patio Heater won't light, it could be due to a bad thermocouple, requiring a replacement. Alternatively, the pilot light assembly might be bent or not in the correct location; ensure it is correctly positioned and then retry the lighting procedure.

Summary

Product Identification and Initial Safety Warnings

Gas Leak Safety Protocol

Immediate actions and precautions if a gas leak is detected.

Flammable Materials and Outdoor Use Warnings

Precautions regarding flammable materials and the mandatory outdoor use requirement.

Carbon Monoxide Hazard Alert

Awareness of carbon monoxide production and risks in enclosed spaces.

Safety Information

Installation and Propane Tank Safety

Guidelines for proper installation adherence, propane tank handling, connection, and maintenance.

General Operational Safety

Essential safety rules for operating the heater, including proximity to flammables and supervision.

Hardware and Parts

Hardware Components List

Identifies and quantifies all screws, nuts, and tools included for assembly.

Parts Identification Diagram

Visual representation of all heater components with their corresponding labels and quantities.

Assembly Instructions

Base and Anchoring Arm Assembly

Steps for securing the base and attaching anchoring components using specified hardware.

Burner and Glass Tube Ring Installation

Procedure for mounting the burner assembly and attaching the glass tube support ring.

Glass Tube and Reflector Assembly

Guidance on inserting the glass tube and securing the upper reflector assembly.

Securing Unit and Connecting Propane

Instructions for anchoring the heater and properly connecting the propane gas tank and regulator.

Operation

Safe Operation Guidelines

Key considerations for safe and effective use, including environmental conditions and handling.

Performing a Leak Test

Step-by-step instructions for testing gas connections for leaks using soap and water.

Lighting and Extinguishing Procedures

Detailed steps for igniting the pilot and main burners, and safely turning off the appliance.

Maintenance and Troubleshooting

Routine Maintenance Tasks

Essential cleaning and inspection procedures to ensure optimal performance and longevity.

Troubleshooting Common Issues

Identifies common problems, their causes, and recommended solutions for operational issues.

Warranty and Contact

Warranty Limitations

Details actions that void the manufacturer's warranty and disclaimers.

Customer Support Resources

Provides contact methods including phone, email, and website for inquiries and support.

Bond HYPH4601-12 Specifications

General IconGeneral
ModelHYPH4601-12
TypePatio Heater
Power SourcePropane
BTU Output46, 000 BTU
Heating AreaUp to 200 sq ft
Height87 inches
Weight38 pounds
Wheels IncludedYes
MaterialSteel
Ignition TypePiezo

Related product manuals