EasyManua.ls Logo

Boneco E2441A User Manual

Boneco E2441A
6 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
10
en
INSTRUCTIONS FOR USE
BONECO E2441A
Question and Answer IconNeed help?

Do you have a question about the Boneco E2441A and is the answer not in the manual?

Boneco E2441A Specifications

General IconGeneral
Output/Humidification Outputup to 300 g/h
Speeds2
Water Tank Capacity3.5 l
Power Consumption20 W
FeaturesAutomatic shut-off
Noise Level25 dB

Summary

Part Names and Technical Specifications

Preparing for First Use

Unpacking

Steps for removing the BONECO E2441A evaporator from its packaging.

Filling Directly

Instructions for filling the BONECO E2441A evaporator directly with water.

Filling Indirectly

Instructions for filling the BONECO E2441A evaporator indirectly by removing the water base.

Operation

Operating Modes

Details on the two operating modes (quiet/night and normal) selectable via the slide switch.

Using Fragrances

Guidance on using the fragrance container for additives like essential oils.

Putting Into Operation

Steps to fill the evaporator with water, plug it in, and select an operating mode.

Water and Hygiene

Advice on emptying, cleaning, and refilling with fresh water to prevent odors.

Cleaning and Maintenance

Care Instructions

General guidance on maintaining evaporator performance and ensuring a long service life.

Replace Ionic Silver Stick and Evaporator Mat

Ionic Silver Stick

Explanation of the Ionic Silver Stick's antimicrobial properties and its role in water quality.

Lifecycle Indicator

Instructions on marking the lifecycle indicator for tracking Ionic Silver Stick replacement.

Replacing the Evaporator Mat

Criteria and steps for replacing the BONECO A7018 evaporator mat.

Replacing the Ionic Silver Stick

Recommendation for annual replacement of the Ionic Silver Stick for optimal effectiveness.