Boneco H400 Instructions For Use

32
en
ON MANUAL HANDLING
Manual handling works conveniently by the knob on the
front side. The BONECO app offers additional, extensive
options for control and automation of the BONECO ap-
pliance.
AUTO MODE
If you have never operated the BONECO appliance with
the BONECO app and switch it on for the first time, it
starts up in AUTO mode. The appliance is preset to a
target relative humidity of 50 percent. The performance
level is automatically adapted to the current humidity: The
drier the air, the higher the performance level.
If the preset target humidity is exceeded, the appliance
switches to standby mode, which is indicated by the puls-
ing LED.
If the humidity drops below the set level, the BONECO
appliance resumes operation.
ADAPTED AUTO MODE
If you have already operated the BONECO appliance with
the BONECO app and set a different humidity, that value is
automatically taken over when the appliance is switched
on.
SWITCHING ON AND OFF
1. Briefly press the knob once to switch on the BONECO
appliance.
The appliance is always in AUTO mode when it is switched
on. You can identify active AUTO mode by the small LED
that lights up above the knob.
2. To switch off the BONECO appliance while it is in
AUTO mode, briefly press the knob once.
MANUAL HANDLING

Boneco H400 Specifications

General

Noise level	55 dB
Control type	Buttons
Country of origin	Switzerland
Water tank capacity	12 L
Evaporation technology	Steam
Air purification capability	Yes
Suitable for room area up to	60 m²
Suitable for room volume up to	150 m³
Product color	White
AC input voltage	100 - 240 V
Power supply type	AC
AC input frequency	50 - 60 Hz
Quantity	1

Weight and Dimensions

Depth	280 mm
Width	400 mm
Height	465 mm
Weight	6770 g