Boneco H400 Instructions For Use

42
en
ABOUT THE PRE-FILTER
The pre-filter cleans the air from coarse contaminants.
Clean the pre-filter if it is dusty or dirty.
CLEANING PRE-FILTER
1. Press down each of the four corners of the cover in
sequence to unlock it.
2. Remove the pre-filter by pulling it upwards by the lug
in its center.
3. Wash the pre-filter under running water using a
cleaning brush.
4. Dry the pre-filter with a cloth.
5. Insert the pre-filter into the appliance.
6. Reattach the cover.
CLEANING PRE-FILTER

Boneco H400 Specifications

General

Noise level	55 dB
Control type	Buttons
Country of origin	Switzerland
Water tank capacity	12 L
Evaporation technology	Steam
Air purification capability	Yes
Suitable for room area up to	60 m²
Suitable for room volume up to	150 m³
Product color	White
AC input voltage	100 - 240 V
Power supply type	AC
AC input frequency	50 - 60 Hz
Quantity	1

Weight and Dimensions

Depth	280 mm
Width	400 mm
Height	465 mm
Weight	6770 g