Boneco ?P2261 - Switching off; Setting the Modes

17
en
A) Switching on
A single press of the combined «ON/SPEED» button (A)
switches on the appliance.
B) Switching off
A single press of the «OFF» button switches off the
appliance.
C) Setting the modes
The operating light (C) lights up in one of the modes: «LO»,
«MID» or «HI». The following modes can be selected by re-
peated pressing of the combined «ON/SPEED» button (A):
• Mode I (LO):
Particularly quiet, suitable for use at night
• Mode II (MID):
Permanent operation with moderate air circulation
• Mode III (HI):
Quick purifying with high air circulation
D) Ioniser function
The ioniser function is activated by pressing the «ION»
button (D) and displayed by the operating light (E).
F ) Timer
The timer function is switched on by pressing the «TIMER»
button (F). The button can be used to set the required opera-
ting time to 1, 2, 4 or 8 hours, or to deactivate the function.
The selected operating time is shown by the display (G).
Operation of the P2261
B
A
C
D
E
F
G
B
A
F
D
Fan
Air inlet