EasyManuals Logo

Boneco W300 User Manual

Boneco W300
13 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #10 background imageLoading...
Page #10 background image
28
en
7. Clean the inside of the water tank by hand or with a
suitable cleaning brush using a commercially avail-
able dish detergent.
8. Clean the water tank cover with a commercially
available dish detergent and a cleaning brush.
9. Put the BONECO W300 back together by following
the steps in reverse order.
CLEANING THE APPLIANCE
4. Turn both drum discs to release them. In doing so,
note the markings on the outer side of the disc.
5. Remove the AW200 evaporator mat from the drum.
6. Clean the water base and the drum either by hand or
in the dish washer at a max. temperature of 50 °C.
DISASSEMBLY AND CLEANING
1. Take off the upper part of the BONECO W300.
2. Remove the drum with the AW200 evaporator mat.
3. Take out the A7017 Ionic Silver Stick
®
.

Other manuals for Boneco W300

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Boneco W300 and is the answer not in the manual?

Boneco W300 Specifications

General IconGeneral
Noise level43 dB
Control typeButtons
Water tank capacity12 L
Evaporation technology-
Air purification capabilityYes
Suitable for room area up to50 m²
Suitable for room volume up to125 m³
Product colorBlack, White
AC input voltage220 - 240 V
Power supply typeAC
AC input frequency50 - 60 Hz
Weight and Dimensions IconWeight and Dimensions
Depth400 mm
Width280 mm
Height412 mm
Weight6400 g

Related product manuals