Boneco W300 User Manual

30
en
CLEANING THE FAN
To clean the fan blades, remove the screen using the fra-
grance container.
Clean the fragrance container thoroughly in case
there is any fragrance residue left over (see section
“Notes on cleaning). It only takes a few drops to dis-
color or even damage the housing of the BONECO
W300.
1. Remove the fragrance container.
2. Use the key for the openings provided in the screen.
3. Turn the key around 90 degrees and carefully lift the
cover. Repeat this step in all corners until the screen
can be completely removed.
4. Clean the fan and the inner area with a damp cloth.
5. Replace the cover. Carefully press down on all four
corners until they audibly click into place.
Do not operate the appliance without a protective
cover!
FAN CLEANING

Boneco W300 Specifications

General

Noise level	43 dB
Control type	Buttons
Water tank capacity	12 L
Evaporation technology	-
Air purification capability	Yes
Suitable for room area up to	50 m²
Suitable for room volume up to	125 m³
Product color	Black, White
AC input voltage	220 - 240 V
Power supply type	AC
AC input frequency	50 - 60 Hz

Weight and Dimensions

Depth	400 mm
Width	280 mm
Height	412 mm
Weight	6400 g