Boneco W400 User Manual

31
en
ABOUT MANUAL OPERATION
Manual operation works conveniently by the knob on the
front side. The BONECO app offers additional, extensive
options for control and automation of the BONECO W400.
AUTO MODE
If you have never operated the BONECO W400 with the
BONECO app and switch it on for the first time, it starts
up in AUTO mode. The appliance is preset to a target
humidity of 50 percent. The performance level is auto-
matically adapted to the current humidity: The drier the
air, the higher the performance level.
If the preset target humidity is exceeded, the appliance
switches to standby mode, which is indicated by the puls-
ing LED.
If the humidity drops below the set level, the BONECO
W400 resumes operation.
ADAPTED AUTO MODE
If you have already operated the BONECO W400 with the
BONECO app and set a different humidity, that value is
automatically taken over when it is switched on.
SWITCHING ON AND OFF
1. Briefly press the knob once to switch on the BONECO
W400.
The appliance is always in AUTO mode when it is switched
on. You can identify active AUTO mode by the small LED
that lights up above the knob.
2. To switch off the BONECO W400 while it is in AUTO
mode, briefly press the knob once.
MANUAL OPERATION

Boneco W400 Specifications

General

Noise level	55 dB
Control type	Buttons
Number of speeds	6
Country of origin	Switzerland
Water tank capacity	12 L
Evaporation technology	Steam
Air purification capability	Yes
Suitable for room area up to	60 m²
Suitable for room volume up to	150 m³
Product color	White
AC input voltage	100 - 240 V
Power supply type	AC
AC input frequency	50 - 60 Hz

Weight and Dimensions

Depth	400 mm
Width	280 mm
Height	433 mm
Weight	6450 g