For 3-wire cable from home power supply
If the cable is damaged or needs replacing, this should be done by an after-sales
technician using the proper tools, so as to avoid any accidents.
•If the appliance is being connected directly to the mains supply, an omnipolar
circuit breaker must be installed with a minimum gap of 0.12in between the
contacts.
•The installer must ensure that the correct electrical connection has been made
and that it complies with safety regulations.
•The cable must not be bent or compressed.
•The cable must be checked regularly and only replaced by a proper qualified
person.
Red wires
Red wires
Green ground wires
Yellow/Green ground wires
Cable from home
power supply
Black wires
Black wires
3-wire cable from cooktop
11
To Next Page
Loading...