EasyManua.ls Logo

BonsenKitchen IC8901 - Before Using Your New Cooktop; Using the Touch Controls

BonsenKitchen IC8901
32 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
iron pot
magnetic circuit
ceramic glass plate
induction coil
induced currents
BEFORE USING YOUR NEW COOKTOP
USING THE TOUCH CONTROLS
•Read this guide, taking special note of the ‘Safety Warnings’ section.
•Remove any protective film that may still be on your ceramic cooktop.
•Remove any protective film that may still be on your Induction cooktop.
•The controls respond to touch, so you don’t need to apply any pressure.
•Use the ball of your finger, not its tip.
•You will hear a beep each time a touch is registered.
•Make sure the controls are always clean, dry, and that there is no object (e.g. a
utensil or a cloth) covering them. Even a thin film of water may make the
controls difficult to operate.
14