Always lift pans off the ceramic cooktop – do not slide, or they may scratch the
glass.
USING YOUR COOKTOP
•After power on, the buzzer beeps once, all the indicators light up for 1 second
then go out, indicating that the cooktop has entered the state of standby mode.
1.Touch the ON/OFF switch. all the indicators show “–”.
2.Place a suitable pan on the cooking zone that you wish to use. Make sure the
bottom of the pan and the surface of the cooking zone is clean and dry.
3.Touching the heating zone selection control, and an indicator next to the key
will flash.
To start cooking
16
To Next Page
Loading...