1.Touching the heating zone selection that you wish to switch off.
2.Turn the cooking zone off by scrolling down to “0” or touching the “slider”.
Make sure the display shows“0”.
3.Turn the whole cooktop off by touching the ON/OFF control.
4.Beware of hot surfaces “H” will show which means cooking zone is too hot to
touch. It will disappear when the surface has cooled down to a safe
temperature. It can also be used as an energy saving function if you want to
heat further pans, use the hotplate that is still hot.
When you have finished cooking
4.Select a heat setting by touching the “-” , “+” or touching the “slider” control.
•If you don’t choose a heat setting within 1 minute, the Induction cooktop will
automatically switch off. You will need to start again at step 1.
•You can modify the heat setting at any time during cooking.
USING BOOST FUNCTION
1. Select the zone with boost function (front left zone).
2. Touching until power level indication shows “P”.
Activate the boost function
1. Select the zone with boost function (front left zone).
2. Touching the "minus" key or touching the “slider” to cancel the Boost function,
and select the level you want to set.
• Boost function can only last for 5 minutes, after that the zone will go to level 9
automatically.
Cancel Boost function
To Next Page
Loading...