6.When the time is set, it will begin to count down immediately. The display will
show the remaining time.
Note: There will be a red dot in the right bottom corner of power
level indication which indicating that zone is selected.
7.When cooking timer expires, the corresponding cooking zone will be switched
off automatically.
Note: Other cooking zones will keep operating if they are turned
on previously.
Note: Touch the heating zone selection control, the corresponding
timer will be shown in the timer indicator.
1. When you set timer for several cooking zones, red dots of the relevant cooking
zones are indicated. The timer display shows the min. timer. The dot of the
corresponding zone blinks.
2.Once the countdown timer expires, the corresponding zone will switch off. Then
it will show the new min. timer and the dot of corresponding zone will flash.
(set to 15 minutes)
(set to 45 minutes)
If the timer is set on more than one zone:
20
To Next Page
Loading...