- 11 -
Set-up location requirements
For safe and trouble-free operation of the device, the
set-up location must fulfil the following requirements:
■ When setting it up, place the appliance on a firm,
flat and horizontal surface.
■ Do not place the device in a hot, wet or extremely
damp environment or in the vicinity of flammable
materials.
■ The mains power socket must be easily
accessible, so that the power cable can be easily
disconnected in the event of an emergency.
Electrical connection
CAUTION
►Before you connect the appliance, compare the
connection data (voltage and frequency) on the
data plate with that of your mains power network.
These data must agree so that no damage is
sustained by the device.
►Ensure that the power cable is undamaged and is
not routed over hot surfaces and/or sharp edges.
To Next Page
Loading...
