- 12 -
►Ensure that the power cable is not taut or kinked.
►Do not let the power cable hang over edges (trip wire
effect).
Insert the plug into the mains power socket.
Sealing vaccum bags
NOTES ON THE FILM
►The bag width may not exceed 11.81 inch. Otherwise
it cannot be welded correctly.
►Use only nylon-PE films with a structure (points or
grooves) on one side and that have a structure
(points or grooves) on one side and a thickness of
approximately 0.006 -0.012 inch (6.8-11.6mil).
Otherwise the weld seam will not be tight and the
appliance may be damaged. You can recognise bags
of this type from the information on the packaging.
The quality of the weld seam will vary depending on
the type and thickness of the bag.
►The supplied bag is suitable for temperatures
between -4 and +212
°F.°F
To Next Page
Loading...
