- 16 -
Vacuuming the bag
You can also suck the air out of the bag (vacuum) during
welding:
CAUTION – PROPERTY DAMAGE!
►Do not evacuate bags that contain liquids. These will get
into the appliance and damage it.
1) Lay the open end of the bag as far into the
appliance so that the opening of the bag is located
centrally under the lower sealing ring
⑤ .
The bag should be
2) inserted no further than the rear
limiters ⑥ and must lie between the front limiters
⑦. Otherwise
the vacuuming and welding will not
function correctly:
VAC Seal
VAC Seal
To Next Page
Loading...
