- 15 -
6) Open the appliance lid ① by pressing the lid
release
⑧ and flipping the lid ① upwards.
Remove the bag. This is now sealed at one end.
NOTE
► Ensure that the weld seam is properly closed. A
correct weld seam should be a smooth, straight
stripe without any creases.
7) Fill the bag. You must leave at least 6 cm of the
bag free up to the edge to be welded.
CAUTION – PROPERTY DAMAGE!
► Fill the bag so that no food scraps or liquids can
leak out during welding and get into the appliance.
NOTE
► Wait 15 seconds before sealing the next bag to
allow the appliance to cool down.
To Next Page
Loading...
