Boonton 9240 Series RF Voltmeter
General Information
1-11
Table 1-2 9240 Series Performance Specifications (continued)
EXTERNAL INTERFACES
Remote Control: Complies with IEEE-488.1 and SCPI version 1993.
GPIB: Implements AH1, SH1, T6, LE0, SR1, RL1, PP0, DC1, DT1, C0, and E1.
RS232: Type-D connector, 9 pins.
Inputs: Front or Rear panel sensor connector; rear panel IEEE-488 connector
and RS-232 connector.
Outputs Front panel or optional Rear panel CAL OUT connector, 50 MHz, 100
mW max; rear panel recorder BNC connector, 9.09 kilohm impedance, 0
to 10 volts into 1 megohm (may be operated into 1 kilohm for 1V fs).
PHYSICAL AND ENVIRONMENTAL CHARACTERISTICS
Case Dimensions: 8.26W x 3.48H x 13.5D inches (21.0 x 8.9 x 34.3 cm), Half-rack width, 2U
height
Weight: 5 lbs (2.3kg)
Power Requirements: 90 to 260 VAC, 47 to 63 Hz
90 to 135 VAC, 47 to 400Hz
15 Watts, 25 VA
Operating Temperature
2
: 0 to 55 °C
Storage Temperature
2
: -30 to +60 °C
Humidity
2
: 95% maximum, non-condensing
Altitude
2
: Operation up to 15,000 feet
Shock
2
: Withstands ±30G, in X, Y, and Z axes
Vibration
2
: Withstands 2G
(
2
as per MIL-PRF-28800F )
OTHER CHARACTERISTICS
Display: Dot matrix 80 character LCD module (4 lines by 20 characters)
Keyboard: 11 Key conductive rubber
Processor: 32-bit Digital Signal Processor
Panel setup storage: Can save and recall 10 complete “user” setups.
To Next Page
Loading...
