Press PWR button (11) to turn on the unit. When the unit is on.
Press and hold for 2 seconds to turn off the unit.
Press release button (18) to detach the removable
faceplate.
Press SEL button (4) shortly to select the desired adjustment
mode. The adjustment
mode will be changed in the following order:
BAS: bass
TRE: treble
BAL: balance
FAD: fader
LOUD: loudness
EQ: equalization
DX: distance
LOC: local
VOL: volume
By rotating the audio knob (4) clockwise or counter-clockwise, it is
possible to adjust the desired sound quality.
Press and hold SEL for 2 seconds. You can choose the area
between USA and EUROPE by rotating the knob 4.
Press DISP button (5) to show the time.
Exhibit current frequency and activated functions on the display
On the front panel of the unit, there is an USB interface (10).
You can connect an USB driver through this interface (10).
The unit can be connected to a portable audio player through
the AUX IN jack (9).
To Next Page
Loading...