Booster BMP-2400USB - Troubleshooting Common Issues

BMP-2400USB
- 37 -
TROUBLE SHOOTING
Before going through the checklist, check wiring connection. If any of the problems persist after checklist
has been made, consult your nearest service dealer
Symptom
Cause
Solution
No power.
The car ignition switch
is not on.
If the power supply is
connected to the car
accessory circuits, but the
engine is not moving, switch
the ignition key to “ACC”.
The fuse is blown.
Replace the fuse.
No sound.
Volume is in minimum
Adjust volume to a desired level.
Wiring is not properly
connected.
Check wiring connection.
The operation keys
do not work.
The built-in
microcomputer is not
operating properly due to
noise.
Press the reset button.
The radio does not
Work. The radio
station automatic
selection does not
work.
The antenna cable is not
connected.
Insert the antenna cable firmly.
The signals are too
weak.
Select a station manually.