This manual describes the assembly and use of the Boraam Rasmus Extension Dining Table, Rasmus Dining Chair, and Rasmus Dining Bench. These pieces are designed to provide a cohesive and functional dining set, offering flexibility in seating and table size.

The Rasmus Extension Dining Table is a versatile piece of furniture designed to adapt to various dining needs. Its primary function is to serve as a dining surface, but its key feature is the extension mechanism, which allows the table to expand in length. This is particularly useful for accommodating a larger number of guests when needed, and then retracting to a more compact size for everyday use or smaller gatherings.

Assembly and Usage of the Extension Dining Table:

The assembly process for the table begins with attaching the table legs to the main table frame. This involves using bolts (C) and washers (A and B) and tightening them with the provided Allen wrench (D). The manual emphasizes the importance of not fully tightening the bolts until all components are in place, allowing for minor adjustments and ensuring proper alignment. Once the legs are securely attached, the table can be flipped upright.

The extension mechanism is a central feature of the Rasmus dining table. To extend the table, the two main halves of the tabletop are pulled apart, revealing a hidden leaf stored within the table's frame. This leaf is then lifted and unfolded, or simply pulled out, depending on the specific design, to fill the gap created by separating the table halves. The manual illustrates a mechanism where the leaf is stored underneath and pivots up into place. Once the leaf is in position, the two main table halves are pushed back together, securing the extension leaf and creating a larger dining surface. The manual shows a locking mechanism (2X) that secures the table in both its compact and extended configurations, preventing accidental separation or collapse.

Maintenance of the Extension Dining Table:

Regular maintenance involves checking all bolts to ensure they are securely tightened. This is crucial for the stability and safety of the table, especially given its extension feature, which involves moving parts. The manual explicitly states, "BE SURE TO CHECK ALL BOLTS SECURELY TIGHTENED PRIOR USING THIS TABLE." This suggests that periodic checks are necessary to maintain the table's structural integrity over time. Cleaning instructions are not provided in the manual, but general care for wooden furniture would apply, such as wiping with a damp cloth and avoiding harsh chemicals.

The Rasmus Dining Chair is designed to complement the dining table, providing comfortable seating. The chair's design appears to be contemporary, with a curved backrest and sturdy legs.

Assembly and Usage of the Dining Chair:

The assembly of the dining chair involves attaching the backrest and seat frame to the chair legs. The manual breaks down the assembly into several steps, each focusing on a specific set of connections.

Step 1: Attaching the backrest (1) to the frame (2) using bolts (D) and washers (A and B). Similar to the table, the manual advises against fully tightening the bolts at this stage ("DO NOT TIGHTEN BOLT COMPLETELY"). This allows for flexibility in aligning the components before final tightening. The Allen wrench (G) is used for this step.
Step 2: Securing the seat frame (1) to the chair legs (2) using bolts (F) and washers (A and B). Again, the instruction "DO NOT TIGHTEN BOLT COMPLETELY" is repeated.
Step 3: Attaching the seat (3) to the assembled frame using bolts (E) and washers (A and B). The instruction to not fully tighten bolts is reiterated.
Step 4: Final tightening of all bolts. Once all components are in place and aligned, the manual instructs to fully tighten all bolts using the Allen wrench (G). The manual shows a locking mechanism (2X) for the chair, which might refer to the final secure tightening of the bolts.

Maintenance of the Dining Chair:

As with the table, the manual emphasizes the importance of checking all bolts for secure tightening before using the chair. "BE SURE TO CHECK ALL BOLTS SECURELY TIGHTENED PRIOR USING THIS CHAIR." This indicates that regular inspections and tightening of fasteners are essential for the chair's stability and longevity.

The Rasmus Dining Bench offers an alternative seating option, ideal for maximizing space or creating a more casual dining atmosphere. Its design appears to be a long, backless or low-backed bench, matching the aesthetic of the table and chairs.

Assembly and Usage of the Dining Bench:

The assembly of the dining bench follows a similar pattern to the chair, focusing on connecting the main components.

Step 1: Attaching the bench seat (1) to the bench legs (2) using bolts (C) and washers (A and B). The instruction "DO NOT TIGHTEN BOLT COMPLETELY" is given, allowing for adjustments.
Step 2: Securing the support bar (3) to the bench legs (2) using bolts (D). Again, the manual advises against fully tightening the bolts at this stage.

Maintenance of the Dining Bench:

The manual concludes with a maintenance instruction for the bench: "BE SURE TO CHECK ALL BOLTS SECURELY TIGHTENED PRIOR USING THIS BENCH." This consistent advice across all pieces of the dining set highlights the importance of regular fastener checks for safety and structural integrity.

General Usage and Maintenance Features Across the Set:

Customer Support: The manual provides clear contact information for customer support, including a phone number, website, and email address. This is a crucial feature for users who encounter issues during assembly, have damaged or missing parts, or simply have questions about their item. The support hours (M-F, 9am-5pm CST) are also specified.
"PLEASE READ ME FIRST" warning: This prominent warning at the beginning of the manual for both the chair and table emphasizes the importance of reviewing the instructions before starting assembly. This helps prevent common mistakes and ensures a smoother assembly process.
Visual Instructions: The manuals rely heavily on clear, isometric diagrams to illustrate each assembly step. This visual approach makes the instructions easier to follow, especially for users who prefer visual guidance over lengthy text descriptions. Each component is clearly labeled with a letter (A, B, C, etc.) and the quantity of each part is specified, aiding in inventory checks before assembly.
Progressive Tightening: The repeated instruction "DO NOT TIGHTEN BOLT COMPLETELY" until later steps is a common and effective assembly practice. It allows for all components to be loosely fitted and aligned before final tightening, which helps prevent misalignment, stripped screws, or difficulty in fitting subsequent parts.
Final Secure Tightening: The final instruction to "CHECK ALL BOLTS SECURELY TIGHTENED" is critical for the long-term stability and safety of all furniture pieces. This implies that users should periodically re-check and tighten fasteners to counteract any loosening that might occur with regular use.

In summary, the Boraam Rasmus dining set is designed for practical home use, offering an extendable table for flexible dining arrangements and complementary seating options. The assembly instructions prioritize clarity through visual aids and emphasize careful, progressive tightening of fasteners, with a strong focus on ongoing maintenance to ensure the safety and durability of the furniture. The inclusion of comprehensive customer support information further enhances the user experience by providing readily available assistance.

Boraam RASMUS DINING CHAIR - Table Pre-Assembly Guidance and Support

Related product manuals