To Next PageTo Next Page
Need help?Do you have a question about the Boreal brisa BRS09HPJ1IA and is the answer not in the manual?
Details technical specifications for the BRS12HPJ1_A model, including power, capacity, and dimensions.
Covers electrical components, including wiring diagrams and PCB layouts.
Provides an overview of wiring symbols and the wiring diagram for the indoor unit.
Details overload protection mechanisms for cooling/dehumidifying and heating modes, including frequency limits.
Explains protection functions related to compressor discharge temperature, including frequency limits and power-off conditions.
Provides essential safety warnings for installing and moving the air conditioner unit.
Outlines critical safety precautions and requirements for electrical connections.
Explains the process of vacuum pumping and detecting refrigerant leaks using a piezometer or soap water.
Lists items to check after installation and describes the test operation procedure.
Covers maintenance procedures, including error code lists and troubleshooting.
Lists common error codes displayed by the unit, their A/C status, and possible causes.
Provides troubleshooting steps for main malfunctions, focusing on sensor, motor, and protection issues.
Details troubleshooting steps for IDU fan motor blocked protection issues.
Guides on troubleshooting issues related to the jumper cap on the mainboard.
Describes troubleshooting for zero-cross inspection circuit malfunctions of the IDU fan motor.
Outlines troubleshooting steps for malfunctions related to the detecting plate (WIFI).
Provides troubleshooting steps for insufficient fluorine protection errors.
Guides on troubleshooting communication errors between indoor and outdoor units.
Details troubleshooting for overcurrent protection issues, including voltage and blockage checks.
Explains troubleshooting for capacitor charge faults in the outdoor unit's control panel.
Addresses IPM protection and phase current overcurrent issues in the outdoor unit control board.
Guides on diagnosing high temperature and overload protection issues in the outdoor unit.
Provides troubleshooting steps for start-up failures of the outdoor unit control board.
General| Refrigerant | R32 |
|---|---|
| Power Supply | 220-240V, 50Hz |
| Cooling Capacity | 9000 BTU |
| Heating Capacity | 9000 BTU |
| Operating Temperature (Cooling) | 18°C to 43°C |
| Operating Temperature (Heating) | -7°C to 24°C |
