BORETTI B400 - Problems and Causes

63
Bernini
www.boretti.com
Gebruiksaanwijzing NL
Mode d’emploi FR
De Dollard 17, 1454 AT Watergang
T + 31 (0) 20 - 436 34 39, F +31 (0) 20 - 436 13 26
W www.boretti.com
E info@boretti.com
T +32 (0)3 450 81 80, F +32 (0)3 458 68 47
W www.boretti.be
E info@boretti.be
Boretti - The Netherlands
Boretti - Belgium
www.boretti.com
BORETTI0086 Cover Gebruiksaanwijzingen_v4.indd 3-4 06-11-15 16:33
EN
« PROBLEMS AND CAUSES
PROBLEM CAUSES SOLUTIONS
Coee does not come
out.
1. No water in reservoir.
2. Coee grind is too ne.
3. Too much coee in the
lter.
4. Appliance was not turned
on or plugged in.
5. Coee has been tamped/
compressed too much.
6. Orange silicon rubber was
not removed.
1. Add water
2. Grind medium ground
coee.
3. Fill lter with less coee.
4. Plug unit into electrical
outlet and turn it on.
5. Rell lter basket with
coee, do not tamp too
much.
6. Remove orange rubber sil-
icon from water reservoir.
Coee comes out
around the edge of the
porta-lter.
1. Porta-lter not rotated to
full lock position.
2. Coee grounds around the
lter basket rim.
3. Too much coee in the
lter.
1. Rotate lter holder to full
lock position.
2. Wipe o rim and brewing
head.
3. Fill with less coee.
Milk is not foamy
after frothing or it is
not coming out of the
frothing tube
1. Ran out of steam
2. Milk is not cold enough.
3. Frothing tube is blocked.
1. Ensure there is enough
water in the reservoir.
2. Chill milk and frothing
pitcher prior to making
cappuccino.
3. Follow the instructions to
clean the milk reservoirs &
frothing tube.
Coee comes out
too quickly
1. Ground coee is too
coarse.
2. Not enough coee in lter.
1. Use a ner grind.
2. Use more coee.
Coee is too weak. 1. Using small lter for dou-
ble shot of espresso
2. Ground coee is too
coarse.
1. Use large lter for double
shot of espresso
2. Use a ner grind.
The three control panel
lights are ashing
alternatively
Water tank is out of water. Add water to reservoir.