ERROR CODE ERROR DESCRIPTION CONTROL
Intensive
( P1 )
Normal (
P2 )
Economic
( P3 )
Quick
( P4 )
Prewash
( P5 )
Inadequate water supply
•
Make sure the water input tap is totally open and that
there is no water cut.
•
Close the water input tap, separate the water input hose
from the tap and clean the filter at the connection end of
the hose.
•
Restart your machine, contact the service if the error
resumes.
Error of continuous water input
•
Close the tap.
•
Contact the service.
The waste water in the machine
cannot be discharged.
•
Water discharge hose is clogged.
•
The filters of your machine might be clogged.
•
Power off-on your machine and activate the program
cancellation command.
•
If the error continues, contact the service.
Heater error
Contact the service.
Alarm is active against water
overflow
•
Power off your machine and close the tap.
•
Contact the service.
Faulty electronic card Contact the service.
Overheating error (temperature
in the machine is too high) Contact the service.
Faulty heater sensor Contact the service.
To Next Page
Loading...
