EasyManua.ls Logo

BORLA XR-1 User Manual

Default Icon
3 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
DOCUMENT PART NUMBER
A-35909 Rev. B
INSTALLATION INSTRUCTIONS
XR-1 Tuner - BMW 253061
BORLA PERFORMANCE INDUSTRIES
500 Borla Drive
Johnson City TN, 37604-7523
805-986-8600
PAGE
1 of 3
Installation Guide
for Borla XR-1 Tuner
Borla XR-1 Tuner (PN - 253061*)
*LEGAL ONLY FOR RACING VEHICLES THAT MAY NEVER BE USED, OR REGISTERED, OR
LICENSED FOR USE, UPON A HIGHWAY.
Thank you for purchasing a Borla Performance XR-1 Tuner. Borla Performance XR-1 Tuner (PN-
253061) is designed for BMW 340i, 440i, and 740i applications (3.0L Turbo in 3 Series: F30, F31, F35, 4
Series: F32, F33, and 7 Series: G11, G12 Chassis).
Borla Performance Industries recommends that you use a professional after market parts installer, who has all the necessary equip-
ment, tools and experienced personnel needed for proper installation. However, should you decide to perform the installation of the
XR-1 Tuner on your own, please ensure that you use all safety precautions including eye protection.
Please take time to read and understand the following
By installing your Borla Performance Tuner, you indicate that you have read this document and you agree with the terms stated be-
low.
It is the responsibility of the purchaser to follow all installation instruction guidelines and safety procedures supplied with your Borla
Performance Tuner.
Borla Performance Industries assumes no responsibility for damages occurring from misuse, abuse, improper installation, improper
operation, lack of responsible care, or all previously stated reasons resulting from incompatibility with other manufacturers products
and/or systems.
If you should have any questions regarding the installation, or any other matter pertaining to your new Borla Performance Tuner,
***** Please compare the parts in the box with the bill of materials provided *****
to assure that you have all the parts necessary for this installation.
These instructions have been written to help you with the installation of your Borla XR-1 Tuner. Please read this document com-
pletely before beginning the installation. To ensure this part number fits your specific model year, please visit our website for the
latest model year listings at www.BORLA.com
Question and Answer IconNeed help?

Do you have a question about the BORLA XR-1 and is the answer not in the manual?

BORLA XR-1 Specifications

General IconGeneral
BrandBORLA
ModelXR-1
CategoryCar Spares
LanguageEnglish

Summary

Introduction and Legal Information

Parts Verification

Ensure all parts are present by comparing them with the provided bill of materials.

Usage Restriction

This product is legally restricted to racing vehicles only, not for highway use or registration.

Vehicle Compatibility

Designed for specific BMW 3.0L Turbo models: 3 Series (F30, F31, F35) and 4 Series (F32, F33).

Installation Guidance

Advises professional installation or user adherence to safety precautions for self-installation.

Installation Preparation

Required Tools

Lists minimum required tools, including a wire cutter for zip-ties.

Included Components

Lists all components included in the Borla Tuner 253061 kit, such as the tuner module and wire harness.

Installation Procedure

Engine Cover Removal

Remove the factory engine cover to access the MAP sensor and inlet pressure sensor.

Sensor Harness Connection

Unplug factory harness, connect XR-1 Tuner harness to MAP and disconnected connectors.

Module Mounting and Connection

Route harness, find a suitable location, secure the XR-1 Tuner module, and connect it to its harness.