borne BTSPK34 - Product Disposal and Battery Safety; Powering the Speaker On and Off; Bluetooth Connectivity; Pairing Your Device via Bluetooth

E-3
Product and Battery Disposal
This product contains a built-in lithium battery and should not be disposed of in normal household
waste. The battery in this device is not intended to be removed by the individual or end user. For
disposal and recycling, please contact your local waste management authorities. The recycling and
processing of electronic waste will make a significant contribution towards helping protect the
environment.
Warning: To reduce the risk of fire and burns, do not disassemble, crush, puncture, short external
contacts or dispose of in fire or water.
POWER ON/OFF
To turn on and off the speaker, slide the ON/OFF Switch to either position.
BLUETOOTH MODE
Pairing a Bluetooth Enabled Device for the First Time to your Bluetooth Speaker
NOTE: Refer to the user manual for your Bluetooth enabled device for instructions on pairing and
connecting Bluetooth devices.
1. Keep the speaker and your Bluetooth enabled device within 1 metre at all times during the
pairing process.
2. On the speaker, slide the ON/OFF Switch to the ON position. You will hear a voice prompt
indicating what mode you are in. (If you are already in the Bluetooth pairing mode, skip to
step 4.)
3. Press the Mode (M) button (Fig 1) on the speaker repeatedly until you are in the Bluetooth
pairing mode.
4. Once you are in the Bluetooth pairing mode, you will hear “BLUETOOTH MODE” and the
LED Bluetooth Indicator Light will start to flash rapidly.
5. Turn on the Bluetooth function on your Bluetooth enabled device and search for Bluetooth
devices. When the search is complete, select “BTSPK34” from the Bluetooth device list. (If a
password is required, use “0000” to finalize the pairing process.)
6. When the Bluetooth connection is successful, you will hear “CONNECTED” and the LED
Bluetooth Indicator Light will start to flash slowly. This means you are connected and the
speaker is ready for use.
NOTE:
 If pairing was unsuccessful, turn off the speaker first and repeat the steps above to re-pair
again.
 After successful pairing, paired devices will remember each other. Unless pairing information
is deleted, re-pairing is not required after the first time.
 If you want to pair the unit with other Bluetooth enabled devices, please disconnect/remove
the existing device and pair with the new device according to the steps above.
7. Once you are successfully connected, you can use the controls on your Bluetooth enabled
device to increase or decrease the volume.