Borofone Technology Co.,Ltd
can provide power for QI wireless charging mobile phones and other devices that support QI
wireless charging.
2.3 operating mode： When the launch pad is output normally, the green indicator is long and
bright。
2.4 standby mode： When the launcher is in standby mode without load, red indicates long
brightness。
2.5 Exception Modes： The launch pad is working abnormally，If metal is placed on the transmitting
coil or an incompatible receiving object，The red indicator is flashing continuously。
2.6 instructions
Plug the power cord into the MICRO input terminal on the wireless transmitter board，Stack the
receiver of a mobile phone that supports wireless charging in the position of the transmitter coil，The
indicator light on the transmitting panel shows that the green light is on for a long time, which is the
normal charging state。
（Adjust the best position to charge more quickly）
2.7 defensive function
Red indicator light flashes when metal objects are placed or incompatible receiving objects on
the transmitting coil.At the same time, the output conversion is stopped, and the normal standby state
is restored after the foreign body is removed，Normal output works when the correct receiver is
placed.
3 Product appearance and technology
NO
item test method Inspection standard/process
3.
1
product
appearance
visual
The appearance of the product shall meet the following
requirements：Reasonable wiring，Element arrangement，
No oxidation of welding disc and welding point，
achromatism，Overall appearance clean without stain，
Does not affect its commercial value
3.
2
product
proces
To Next Page
Loading...