Borri GALILEO UPS - Installation and Operation; Unpacking and Package Contents; Installation Environment and Positioning

Page 5
Battery box
3 Installation and operation
Installation position
Itisnecessarytoselectaproperenvironmenttoinstallthe
unit,inordertominimizethepossibilityofdamagetothe
battery box and extend the life of the batteries.
Pleasefollowtheinstructionsbelow:
 Keepatleast30cm(12inches)clearancefromtherearpanel
of the battery box from the wall or other obstructions.
 Donotblocktheair-flowtotheventilationopeningsof
the unit.
 Pleaseensuretheinstallaonsiteenvironmentalcondions
 areinaccordancewiththebaeryboxworkingspecicaons
 toavoidoverheatandexcessivemoisture.
 Donotplacethebaeryboxinadustyorcorrosive
 environmentornearanyammableobjects.
Thisbaeryboxisnotdesignedforoutdooruse.
The packing condition and the external outlook of the unit must be
inspected carefully before installation.
Retain the packing material for future use.
Unpacking
TakethebatteryboxoutofthePEfoam.
Removethepackingmaterials.
Note: The battery box module is approx. 12.2 ~ 50 kgs, be cautious when unpacking
and lifting the unit to avoid injury.
Standard package includes:
DCconnectcable(C1orC2)
AccessoriesforTowerMount
AccessoriesforRack/TowerA1~A2,B1~B2,S1~S3
1pcsC1 C2 2pcs