13
detergent starting at the bottom and work your way up-
ward. This will prevent the detergent from sliding down
and causing streaks. High pressure rinsing should also
progress from the bottom to top. On particularly tough
stains, it may be necessary to use a brush in combination
with detergents and high pressure rinsing.
NOTE: Use only detergents formulated for
pressure washes.
WATER SUCKING FUNCTION
• Connect the hose to high pressure mashine and con-
nect it to the water tank;
• Turn on high pressure mashine;
• PUSH and keep the trigger of gun some time for lled
water pump;
• Lets release the trigger of gun and connect necessary
nozzle;
• High pressure mashineIS ready to work.
SERVICE & MAINTENANCE
Unplug the electric cable (power source)
prior to any maintenance or preparatory
storage operations.
Make sure that the machine is not live when carrying out
maintenance work on the motor.
To ensure good performance, check and clean the suc-
tion and detergent lters after every 50 hours of oper-
ation.
Long periods of disuse may lead to the formation of lime
scale deposits. Working through the hole on the rear,
RELEASE the motor using a screwdriver (for models with
this feature).
Then remove the screwdriver and proceed with the re-
start operations.
Cleaning
Keep the ventilation slots of the machine clean to pre-
vent overheating of the engine. Clean the housing reg-
ularly with a soft cloth, preferably every time it is used.
Keep the air vents free from dust and dirt. Remove stub-
born dirt with a soft rag moistened in soapy water. Do
not use any solvents such as petrol, alcohol, ammonia,
etc. as such substances can damage the plastic parts.
Lubrication
The appliance does not need any extra lubrication.
Storage and transportation
Keep the high pressure washer in well-ventilated dry
premises with temperature not going below +5ºC. Oper-
ate the cleaner with non-corrosive / non-toxic antifreeze
before storing for the winter.
DISPOSAL
Discarded electric appliances are recyclable and
should not be discarded in the domestic waste!
Please actively support us in conserving resourc-
es and protecting the environment by returning
this appliance to the collection centres (if available).
Made in China.
To Next Page
Loading...
