11
stains, it may be necessary to use a brush in combination
with detergents and high pressure rinsing.
NOTE: Use only detergents formulated for
pressure washes.
WATER SUCKING FUNCTION
• Connect the hose to high pressure mashine and con-
nect it to the water tank;
• Turn on high pressure mashine;
• PUSH and keep the trigger of gun some time for lled
water pump;
• Lets release the trigger of gun and connect necessary
nozzle;
• High pressure mashineIS ready to work.
SERVICE & MAINTENANCE
Unplug the electric cable (power source) pri-
or to any maintenance or preparatory stor-
age operations.
Make sure that the machine is not live when carrying out
maintenance work on the motor.
To ensure good performance, check and clean the suction
and detergent lters after every 50 hours of operation.
Long periods of disuse may lead to the formation of lime
scale deposits. Working through the hole on the rear, RE-
LEASE the motor using a screwdriver (for models with this
feature).
Then remove the screwdriver and proceed with the restart
operations.
Cleaning
Keep the ventilation slots of the machine clean to prevent
overheating of the engine. Clean the housing regularly
with a soft cloth, preferably every time it is used. Keep
the air vents free from dust and dirt. Remove stubborn
dirt with a soft rag moistened in soapy water. Do not use
any solvents such as petrol, alcohol, ammonia, etc. as such
substances can damage the plastic parts.
Lubrication
The appliance does not need any extra lubrication.
Storage and transportation
Keep the high pressure washer in well-ventilated dry
premises with temperature not going below +5ºC. Oper-
ate the cleaner with non-corrosive / non-toxic antifreeze
before storing for the winter.
DISPOSAL
Discarded electric appliances are recyclable and
should not be discarded in the domestic waste!
Please actively support us in conserving resources
and protecting the environment by returning this
appliance to the collection centres (if available).
Made in China.
To Next Page
Loading...
Need help?
General
