Borum CH16NT - Troubleshooting; Warranty

Aug-19 Product Code: CH16NT
Made in China to TQB Brands Pty Ltd specifications Page 12
Visit us at www.tqbbrands.com.au
TROUBLESHOOTING
PROBLEM
POSSIBLE CAUSE
REMEDY
Noisy Operation
 Incorrect belt tension
 Dry spindle
 Loose pulley
 Loose belt
 Bad bearing
 Adjust tension
 Remove spindle/quill assembly & lubricate
 Tighten pulley
 Adjust belt tension
 Replace bearing
Excessive drill wobble
 Loose chuck
 Worn spindle shaft or bearing
 Bad chuck
 Tighten by pressing chuck down against table
 Replace spindle shaft or bearing
 Replace chuck
Motor won’t start
 Power supply
 Motor connection
 Switch connections
 Motor windings burnt
 Bad switch
 Check power cord
 Check motor connections
 Check switch connections
 Replace motor
 Replace switch
Drill binds in workpiece
 Excessive pressure on feed handle
 Loose belt
 Loose drill
 Speed too fast
 Apply less pressure
 Check belt tension
 Tighten drill with key
 Change speed
Drill burns or smokes
 Incorrect speed – reduce RPM
 Fillings caught in drill bit
 Poor drilling
 Incorrect feed pressure
 Refer to RPM sheet
 Clean drill bit
 Sharpen drill bit or replace drill bit
 Apply less pressure
Table difficult to raise
 Needs lubrication
 Bent rack
 Table lock too tight
 Lubricate with a light oil
 Straighten rack
 Loosen clamp
WARRANTY
BORUM Industrial products have been carefully tested and inspected before shipment and are guaranteed to be free from
defective materials and workmanship for a period of 12 months from the date of purchase except where tools are hired out when
the guarantee period is ninety days from the date of purchase.
Should this piece of equipment develop any fault, please return the complete tool to your nearest authorised warranty repair
agent or contact TQB Brands Pty Ltd Warranty team – warranty@tqbbrands.com.au.
If upon inspection it is found that the fault occurring is due to defective materials or workmanship, repairs will be carried out free
of charge. This guarantee does not apply to normal wear and tear, nor does it cover any damage caused by misuse, careless or
unsafe handling, alterations, accident, or repairs attempted or made by any personnel other than the authorised TQB Brands Pty
Ltd repair agent.
This guarantee applies in lieu of any other guarantee expressed or implied and variations of its terms are not authorised.
Your TQB Brands Pty Ltd guarantee is not effective unless you can produce upon request a dated receipt or invoice to verify your
proof of purchase within the 12month period.
Consumer Guarantee
Our goods come with a guarantee that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement
or refund for a major failure and compensation for any other reasonably foreseeable loss or damage. You are also entitled to have
the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure.