Bosch 0.600.849.001 - User Manual

Questions and Answers

D
Diane JohnsonAug 20, 2025
What to do if the blades are running slow or the anti blocking feature is not functioning on Bosch Brush Cutter?
- H
  howecourtneyAug 20, 2025
  If your Bosch Brush Cutter's blades are running slow or the anti-blocking feature isn't working, there are several potential causes: * The battery may not be properly inserted. Ensure it is correctly placed in the battery charger. * The battery contacts might be contaminated. Try cleaning them by inserting and removing the battery several times, or consider replacing the battery. * The battery pack could be defective, requiring a replacement. * The battery might be discharged. Recharge it, referring to the “Battery Charging” section for guidance. * The battery might have been stored outside its recommended temperature range. Allow it to warm naturally to room temperature (within the operating range of 0 – 45 °C).
D
Derek ThompsonAug 22, 2025
Why my Bosch Brush Cutter does not operate?
- J
  Jason LawrenceAug 22, 2025
  If your Bosch Brush Cutter isn't operating, it could be due to a discharged battery. In this case, recharge the battery, consulting the “Battery Charging” section for instructions. Alternatively, the safety switch may not be activated correctly. Refer to the “Initial Operation” section for guidance.
L
Lisa MartinezAug 25, 2025
Why is the cutting time per battery charge too low on my Bosch Brush Cutter?
- D
  Deborah EstesAug 25, 2025
  If the cutting time per battery charge is too low on your Bosch Brush Cutter, consider the following: * There might be too much friction due to a lack of lubricant. Apply lubricant spray. * The blade may need cleaning. Clean the blade thoroughly. * The battery may not be fully charged. Recharge the battery, referring to the “Battery Charging” section for instructions.
R
Roger RoseAug 26, 2025
What to do if the battery charge indicator does not light up properly on my Bosch Brush Cutter?
- R
  rachel24Aug 26, 2025
  If the battery charge indicator on your Bosch Brush Cutter does not light up properly, it could be due to the mains plug of the battery charger not being fully plugged in. Ensure that you insert the mains plug completely into the socket outlet. It's also possible that the socket outlet, mains cable, or battery charger is defective. Check the mains voltage and have the battery charger inspected by an authorized after-sales service agent for Bosch power tools.
Q
qcarterAug 27, 2025
Why is the cutting blade hot on my Bosch Brush Cutter?
- K
  kbellAug 27, 2025
  If the blade on your Bosch Brush Cutter gets hot, it's likely because the cutting blade is blunt. To resolve this, have the blade sharpened.
J
Jimmy WalkerAug 29, 2025
Why does my Bosch Brush Cutter operate intermittently?
- J
  Jasmine DavisAug 29, 2025
  If the Bosch Brush Cutter operates intermittently, the internal wiring of the garden product may be damaged, or the on/off switch may be defective.
A
alexandra82Aug 31, 2025
How to fix too much friction on Bosch Brush Cutter?
- R
  ronald64Aug 31, 2025
  If you are experiencing too much friction on your Bosch Brush Cutter, apply lubricant spray.
J
Jason BrownSep 2, 2025
Why does the motor run but blades remain stationary on my Bosch Brush Cutter?
- B
  bhowardSep 2, 2025
  If the motor runs, but the blades remain stationary on your Bosch Brush Cutter, there is an internal fault.
C
Christopher OconnorSep 4, 2025
Why is my Bosch Brush Cutter making excessive vibrations or noise?
- T
  terrimillerSep 4, 2025
  If you notice excessive vibrations or noise coming from your Bosch Brush Cutter, the garden product may be defective.
C
Colleen GallowaySep 6, 2025
What does continuous lighting of the battery charge indicator mean on my Bosch Brush Cutter?
- D
  David AguilarSep 6, 2025
  No charging procedure is possible for continuous lighting of the battery charge indicator.