English–30
0 276 001 SPUen | (23.4.14) Bosch eBike Systems
Troubleshooting
Display unit Intuvia
Error Code Indicator
The components of the eBike system are continuously and
automatically monitored. When an error is detected, the re-
spective error code is indicated in text indicator d.
To return to the standard indicator, press any button on the
display unit or on the operating unit 10.
Depending on the type of error, the drive unit is automati-
cally shut off, if required. Continued travel without assis-
tance from the drive unit is possible at any time. However,
have the eBike checked before attempting new trips.
Troubleshooting actions may be performed by the
owner except those explicitly noted as “Contact your
Bosch eBike dealer”.
Code Cause Corrective Action
410 One or more buttons of the display unit are
blocked.
Check if any buttons are blocked, e.g., by dirt or debris. Clean the
buttons, if required.
414 Operating unit connection problem Have connections and contacts checked.
418 One or more buttons of the operating unit
are blocked.
Check if any buttons are blocked, e.g., by dirt or debris. Clean the
buttons, if required.
422 Drive unit connection problem Have connections and contacts checked.
423 Battery pack connection problem Have connections and contacts checked.
424 Communications error among the
components
Have connections and contacts checked.
426 Internal time-out error Restart the system. If the problem persists, contact your
Bosch eBike dealer.
430 Internal battery pack of display unit empty Charge display unit (in holder or via USB port).
440 Internal error in the drive unit Restart the system. If the problem persists, contact your
Bosch eBike dealer.
450 Internal software error Restart the system. If the problem persists, contact your
Bosch eBike dealer.
490 Internal error in the display unit Have the display unit checked.
500 Internal error in the drive unit Restart the system. If the problem persists, contact your
Bosch eBike dealer.
502 Illumination error Check the light and the associated wiring. Restart the system. If the
problem persists, contact your Bosch eBike dealer.
503 Error of the speed sensor Restart the system. If the problem persists, contact your
Bosch eBike dealer.
510 Internal sensor error Restart the system. If the problem persists, contact your
Bosch eBike dealer.
511 Internal error in the drive unit Restart the system. If the problem persists, contact your
Bosch eBike dealer.
530 Battery pack error Switch off the eBike, remove the battery pack and reinsert the
battery pack. Restart the system. If the problem persists, contact
your Bosch eBike dealer.
531 Configuration error Restart the system. If the problem persists, contact your
Bosch eBike dealer.
To Next Page
Loading...
