To Next PageTo Next PageWhy are three LEDs flashing on my Bosch DC Drives battery?
If three LEDs are flashing on the battery of your Bosch DC Drives, it means the battery is either too warm or too cold. Disconnect it from the charger and wait until it reaches the correct charging temperature before reconnecting.
What to do if two LEDs flash on my Bosch DC Drives battery?
If two LEDs are flashing on the battery of your Bosch DC Drives, it indicates that the battery is defective. In this case, you should contact an authorized bike dealership for assistance.
General| Rated Power | 250W |
|---|---|
| Torque | 40 Nm |
| Battery Voltage | 36V |
| Maximum Speed | 25 km/h (EU), 20 mph (US) |
| Assistance Levels | Eco, Tour, Sport, Turbo |
| Battery Compatibility | Bosch PowerPack |
| Display Compatibility | Bosch Purion, Intuvia, Nyon |
| Charging Time | 3.5h - 7.5h (depending on battery capacity) |
Details warnings and their meanings (DANGER, WARNING, CAUTION) to ensure safe operation.
Provides general safety instructions and advice to prevent serious injury or death.
Explains how to read and understand the manual and other provided documents for proper use.
Explains graphical conventions like broken lines used for hidden items or references.
Lists safety instructions specific to Bosch PowerPack batteries found on product labels.
Lists safety instructions specific to Bosch PowerTube batteries found on product labels.
Provides critical safety warnings for Bosch eBike batteries, including handling and usage precautions.
Illustrates and labels the components of the Bosch PowerPack battery for identification.
Illustrates and labels the components of the Bosch PowerTube battery for identification.
Guides initial battery testing and checks for damage before first use in the eBike.
Provides instructions on how to charge the battery correctly using approved chargers.
Explains the function and meaning of the battery's LED indicator for charge status.
Details how to use two batteries on a single eBike, including charging socket considerations.
Step-by-step guide for inserting and removing the standard Bosch eBike battery.
Step-by-step guide for inserting and removing the rack-mounted Bosch eBike battery.
Details the process for safely removing the PowerTube battery from the eBike frame.
Details the process for safely inserting the PowerTube battery into the eBike frame.
Instructions for starting the eBike system and battery, including lock checks.
Details how to switch the eBike system and battery on and off using the on/off button.
Provides guidelines and safety precautions for transporting the eBike, including weight considerations.
Outlines procedures for maintaining and cleaning eBike components, emphasizing authorized service.
