43
Toll Free: 877-BOSCH-99
Boschtools.com
SDS-plus
®
is a registered trademark of Robert Bosch GmbH.
1 618 580 000 SDS-plus® Right Angle Attachment
Angle drill head for effortlessly drilling concrete in hard
to reach spots. Pivots through 360° ensuring correct
positioning for any application.
• For SDS-plus
®
Rotary Hammer Item #s
11224VSR/VSRC, 11250VSR
• Remove side handle to attach
• Tool length increases by 2-3/4"
• Tool length is offset by less
than the shank insertion
depth into the bit holder
• Impact strength is reduced
by approximately 40%
Hammer Attachments
2 607 018 296 SDS-plus® Chipping Adapter
• For SDS-plus® Rotary Hammer
Item #s
11225VSR,
11225VSRH and
11250VSR.
1 618 190 006 Dust
Extraction Fixture
• Attaches to tool and vacuum cleaner
hose to provide excellent dust
collection when drilling in dust-sensitive
areas, such as computer rooms and
medical facilities
• For use with bits up to 3/4" in diameter (depending on tool's bit capacity)
for extracting fine dust
• Built-in depth gauge and adjustable depth limiter
• Easy attachment to compatible tools and auxiliary handles
(see Dust Extraction Compatibility Charts)
• Includes Dust Cover 1 610 591 006
• Does not fit Item # 11239VS
1 618 190 009 Dust Extraction Fixture
• Attaches to tool and vacuum cleaner
hose to provide excellent dust
collection when drilling in dust-sensitive
areas, such as computer rooms and
medical facilities
• For use with bits up to 1-9/16" in
diameter (depending on tool's bit capacity)
for extracting fine dust, wood or metal drilling debris
• Built-in depth gauge and adjustable depth limiter
• Easy attachment to compatible tools and auxiliary handles
(see Dust Extraction Compatibility Charts)
• Includes Dust Cover 1 615 502 004
• Does not fit Item # 11239VS
1 618 571 014 Chuck With Integral SDS-plus® Shank
• 1/2" capacity chuck with integral SDS-plus® shank.
• Use for straight shank drill bits.
• For wood, metal and fastening.
• Can be used in the drill only mode.
• For all Bosch SDS-plus®
Rotary Hammers.
Item # Description
VAC001 15' Vacuum Hose (Fixture to Vacuum)
1 610 591 006 Replacement Dust Cover
Item # Description
VAC001 15' Vacuum Hose (Fixture to Vacuum)
VAC002 Connects 1-1/4" or 1" hoses to tools that have
ports for 35mm hoses
VAC009 Anti-static 19mm 3-meter (9.85-ft. locking hose)
VAC010 Anti-static 19mm 5-meter (16.4-ft. locking hose)
1 610 502 004 Replacement Dust Cover
Item # Description
1 610 508 015 Replacement Dust Boot
CRK005 Replacement Chuck Key
To Next Page
Loading...
