Bosch 11221DVS - Rotary Hammers

33
Toll Free: 877-BOSCH-99
Boschtools.com
See page 44 for
hammer drill accessories.
BOSCH
Specifications
Rating 120V AC
Amperage 8.5
No Load RPM 0-1,100 / 0-3,000
No Load BPM 0-18,000 / 0-48,000
Spindle Size 1/2" -20"
Maximum Capacities (In.)
Concrete 3/4" (3/8" in 2nd)
Steel 1/2" (1/4" in 2nd)
Wood 1-1/2"
Length (in.) 13-1/4"
Weight (lbs.) 6.0
Includes
360° Auxiliary Handle ........... 2 602 025 118
Depth Gauge .......................... 1 613 001 010
1199VSRK
Carrying Case ........................ 2 605 438 074
Features
• Bosch-built High-output - 8.5 Amp Motor
• 1/2" 3 jaw chuck - For rugged hammer
drilling applications
• Dual-Mode Selector - Easily converts from rotation
only to hammer drill mode
• Patented Rotating Brush Plate - Provides equal
power in reverse to easily back out bound-up bits
and doubles brush life
• Pistol-Grip Handle - Compact ergonomic design
with soft grip
• Variable-speed Reversing Trigger - For accurate bit
starting, as well as removing fasteners or bound bits
• 2-Speed Gear Box - Select high-speed or high-
torque applications
• Ambidextrous Lock-on Button - Helps reduce fatigue
• 360° auxiliary handle with built-in depth gauge - Wide
range of movement along with consistent drilling depth
• Integral slip clutch - Helps minimize torque reaction
• 12 foot power cord - For added user reach
and convenience
• Metal Gear Housing - For long life and rugged job
site durability
• Patented cord turret - Allows cord to pivot 35° on
a ball joint for added flexibility and longer cord life
1199VSR(K)
1/2" Dual Torque Hammer Drill
Hammer Drills/Rotary Hammers
Specifications
Rating 120V
Amperage 4.8
No Load RPM 0-1,700
No Load BPM 0-4,400
Impact Energy (ft./lbs.) 1.6
Maximum Capacities (in.)
Concrete 5/8"
Steel 1/2"
Wood 1-1/2"
Optimal Concrete Capacity Range (in.)
3/16" - 5/16"
Length (in.) 11.9"
Weight (lbs.) 4.8
Includes
Side Handle ............................ 2 602 025 149
Depth Gauge .......................... 2 603 001 009
3/16" SDS-plus® Bit ........................HC2011
1/4" SDS-plus® Bit ...........................HC2041
3/8" SDS-plus® Bit ..........................HC2061
Carrying Case ..................................Included
11258VSRC
3-Jaw ClicLoc™ Chuck ...................Included
SDS-plus® ClicLoc™ Chuck ...........Included
Carrying Case ..................................Included
Features
• Light Weight Design – At 4.8 amps and 4.8 pounds,
the tool is perfect for small diameter drilling
applications, especially overhead
• SDS-plus® Tool Holder – Tool-free bit changes
with automatic bit locking, dust protection and
maximum impact energy transfer rate
• Variable-Speed Trigger – For accurate bit starting,
as well as removing fasteners or bound bits
• 2-Mode Selector – Easily converts from rotation
only to rotary hammer
• Cushion Grip Handle –Optimized design provides
increased comfort
• 360° Auxiliary Handle with built-in Quick Release
Depth Gauge – Provides wide range of movement
along with consistent drilling depth
• Integral Clutch – Helps minimize torque reaction
11258VSRC also features
• ClicLoc™ Chuck Change System – Choose
between the SDS-plus® tool holder for drilling
in concrete and masonry or the three-jaw carbide
tipped chuck for drilling wood and metal
11258VSR(C)
5/8" SDS-plus® Concrete Drill
Flexibility to work in a variety of materials
Concrete
Masonry
Metal
Wood
3-jaw chuck
SDS-plus
®
See pages 44–47, 203–208 for
SDS-plus® accessories.
BOSCH
Carrying Case
Included
Carrying Case
Included